Fire Rated Downlight Mitt Cover (Box of 50)

Regular price $1,185.00

Fire Rated Downlight Mitt Cover (Box of 50)

  • Up to 13W LED
  • Install up a 80mm cut-out
  • Installable from below the ceiling – Save time on installation.
  • Insulation building into the cover
  • Cable tie control gear up and away from insulation
  • Sound proofing RW34 - RW38
  • Up Tom 2hour red rating
  • 10 Year Warranty

IMPORTANT! There maybe other cheaper products on the market, but they may not comply to AS/NZS 5110 Barrier Standard, they sometime also need to be assembled on site and they may not have a place to cable tie control gear.  Be sure to check that you are comparing our product with a Cover that complies to the barrier standard called up by AS/NZS 60598.

Suitable for LED recessed lighting fitting only of up to 13watts unless specified otherwise.  Contact us, or your luminaire manufacturer if you have any questions.  Not compatible with any Halogen Lighting fittings.

The Downlight Mitt is a non ventilated downlight product which focuses on fixing the inefficiencies of downlights.  The Downlight cap is made out of an intumescent/insulative material taking downlight safety to a new level, while also providing an R-value of 0.5 above the luminaire.  This Downlight cap product is designed primarily for LED fittings running LED transformers/control gear.  Installation of the Downlight Mitt can be done from above or below the Ceiling.  Mastic should be used when installing from above, to create a fixing and an air tight fit.

Downlight Mitt Cover product is designed to significantly improve the building performance inefficiencies with recessed lighting, while providing a sound proofing and and fire rating of up to 2 hours.   Installable from below the ceiling, this product is compatible with all IC rated LED Downlight fittings (recommended wattage of up to 13W).